Dionne's Journey - The Variable Voltage Battery - Care & Safety - part 10

Hi, Come on in. Let’s vape together!

Did you try out any of the other clearomisers we spoke about?

Once you have begun to try out and look at different clearomisers and see ohms ratings beside them you might also begin to hear and read about Variable Voltage batteries.

So I thought it might be useful for us to talk about these….

The Ego batteries supplied with Exhale’s Amego, CE5 and Kyngo kits all have a voltage of 3.7. But, now that you’ve tried other clearomisers with these batteries maybe you have found that with each different one the vaping experience or quality of vape you received might have been different?

Perhaps with different clearomisers alongside of these different experiences you’ve also found that the liquid and vape taste alters as well? I know along the way I’ve had different results which ultimately led me to try more things in the search for the perfect vape!

A lot of people find that things are almost right but that they want a more full vape… one that packs more of a punch… more vapour, a bigger hit….and it is then that adding the variable voltage battery to their kit can make a big difference.

It is important when using a Variable Voltage (VV) battery that you have some understanding of voltage (V) and resistance (oHms). I mentioned these in a little detail when we talked last time, about clearomisers.

The standard Ego battery has a power output of 3.7v and this voltage is applied to your atomisation device with its resistance measure in oHms. When you apply a higher voltage you’re applying more power and in turn your device atomises the liquid at a higher temperature. It is this additional heat that creates the fuller, bigger vape and the change in taste of the liquid. Thus, having a battery that allows you to alter the voltage enables you to tailor your experience and you will find that by experimentation different devices will provide a better vape with different voltages applied.

A word or two of caution:

Raising the voltage and increasing the heat will have an affect on the life span of your atomisation device. The coil will burn out much more quickly.

Raising the voltage too high will burn our your coil and/or your liquid.

There are charts available that provide a guide as to the safe voltage to apply to your atomisation device and it is a good idea to check them whilst also it is sensible to increase voltage only in small increments until the vape you want is achieved.

Suggested voltage by ohms for device:

Atomiser Resistance (oHms) – Battery Voltage Output
2.2 oHms – 3.00 volts
2.5 oHms – 3.4 volts
2.8 oHms – 3.7 volts
3.2 oHms – 4.2 volts
4.5 oHms – 6.00 volts

Exhale have a range of variable voltage batteries and you have already been introduced to the Innokin iTaste MVP V.3, the ePower V.2 starter kits… Exhale also stock the Innokin iTaste V.3 a battery with many of the same features but is smaller and in the more common pen style, rather than box mod.

iTaste V.3

This kit features a long square profile 800mAh microprocessor controlled variable voltage/variable wattage passthrough battery:

Variable Voltage: Increase or decrease voltage between 3.3v – 5v

Variable Wattage: Increase of decrease wattage be

tween 6w – 11w.

Passthrough: Ability to continue vaping whilst battery is simultaneously charging.

Ohms Meter: The iTaste detects the resistance of the atomiser attached and will display this on the screen.Puff Counter: This records how many puffs have been taken. The count is cleared when the battery is turned off.

Short Circuit/Atomiser Protection: This helps protect the battery from damage caused from a faulty atomiser.

Over Discharge Protection: The microprocessor monitors the battery and will automatically switch off when it is discharged.

LED Battery Indicator: The indicator changed colour dependant on the status of the battery.

  • Green – fully charged
  • Yellow – half charged
  • Red – charge required.

  • Dual Threaded:
    Accepts all Ego and 510 thread atomisers in the Exhale range of clearomiser products.

    Now that we’ve looked at e-liquids, all of Exhale’s current starter kits, batteries and clearomisers I thought we should turn our attention towards and concentrate our minds on the care and safety of using our products.

    There are good guides available advising us about proper care and use for each of the kits and clearomisers we’ve discussed and by paying attention to those and by regularly maintaining our equipment we can ensure we get the best vaping experience whilst also getting the best value for our money.

    Exhale also provide what I would consider essential guidance on safety and care of lithium batteries and I cannot stress enough that these should feature highly on your reading list. Here’s why….

    Battery Safety:

    Lithium batteries are very safe however, there are some very important aspects to consider. As well as the points below Exhale offers on their website a guide on lithium battery care and safety which is located in their Guides section. Additionally, on every page for batteries and kits they strongly recommend using a LiPo Guard Safety 

    Charging Bag.

    The bag encloses the battery and charging lead inside during charging so that if anything untoward should occur the fireproof bag helps to contain any sparks or flames. Although I have never had any problems at all, I have read media stories about exploding batteries and although I recognise the media can blow things out of proportion I prefer to exercise caution and safety holding a ‘you never know’ point of view. Didn’t grandma always say “Better to be safe than sorry”?

    You Never Know!

    There are fire risks with rechargeable batteries, for example if they are overcharged, become short circuited, if they have become submerged in water (even if they have been dried out) or if their cases/shells have become damaged.

    For your own safety:

    Only charge for the recommended time and remove it from the charging source as soon as the indicator shows that charging is complete.

    Never leave a charging battery unattended.

    Adopt the use of a LiPo Guard bag.

    Use the correct USB adaptor. Never use one that comes with a tablet, phone or similar device.

    Additionally:

    Always use the correct charging equipment and do not use any that appears worn or broken.

    Don't subject your battery to extreme temperates. This includes high as well as low temperatures. It might be too easy in summer to leave a battery in a close car for example where it gets very hot incredibly quickly.

    So, don’t leave your batteries in direct sunlight or where there is water or moisture.

    When out and about:

    Don’t leave or keep your batteries with or near to keys, coins or metal objects.

    Only ever store or transport your battery in a non-conductive container.

    I really don’t want to scare you, but of course I want you, your family and your home to be safe. So please do take time to learn about lithium battery care and pay attention to the Exhale’s guide.

    Next time we meet we can look at custom blending, answer some of the most asked questions such as life spans of atomisation devices, how to care for them to get the longest life and best performance from them and your equipment.

    See you soon

    28th Mar 2014 Dionne

    Recent Posts