Description
The Aspire ET-S BVC clearomiser is an upgraded version of their original and universally popular ET BDC clearomiser/tank.
On the exterior of the ET-S BVC Glassomiser is a coloured metal sleeve which wraps itself around the barrel of the toughened pyrex glass tank offering it additional protection during day to day usage.
Two oval window slot cut outs in the sleeve allow you an uninterrupted clear view of your liquid levels so you'll always know exactly how much 'fuel' is in your tank.
Its curvaceous mouthpiece is cool and shaped to be comfortable between the lips. It is made from super shiny and durable chromed steel. The same material is used for the base hardware in which its replaceable coil is nestled.
The Aspire ET-S uses Aspires BVC Coils and is designed with an airflow system that eliminates the common issues that at one time plagued vapers. With Aspire's ET-S clearomiser you'll experience no leaking, just plenty of flavourful vaping with maximum vapour for a tank of this category and size.
Filled from the bottom with the base hardware removed the tank will accept 2ml of liquid.
Filling: Hold tank with mouthpiece pointing towards the floor. Now unscrew the base hardware. Gently fill tank space with liquid making sure that you fill the eliquid into the side of the tank and that no liquid enters into the chimney shaft in the centre.
Replacing a Coil: Coils are replaced by removing the base hardware with mouthpiece pointing toward the floor. Take a tissue to hold the spent coil between the fingers then unscrew from the base hardware section. Replace the a new coil and replace this section to the tank.
• When using a new coil always allow the new coil to sit in a filled tank for around 2 minutes before vaping for the first time.
• Priming can assist with a new coil. Take one short sharp inhale without power applied (do not engage the battery button).
Aspire ET-S Clearomiser Specifications:
• Coil Type: Bottom Vertical Coil (replaceable heads)
• Coil Resistance: 2 x 1.8 ohm coils suitable for vaping at (3.0 -5.0V). Can also be used with 1.6Ω (3.0-4.2V) & 2.1Ω (3.0-6.0v) coils
• Thread: 510 / eGo
• Liquid Capacity: 2ml
• Size: Diameter - 14.5mm Height 74.8mm
• Colour Options : Stainless Steel or Black
View AllClose
Warranty Information
All of Exhale's products are covered with a 30 Day Guarantee. 'Exhale' recommends purchasers should be aware that electronic cigarette Atomisers and batteries, although made to the highest standards, are functional devices that may fail and will deteriorate over a period of time, more so if in daily use.
View AllClose