Aspire Spryte AIO Starter Kit

(1 review) Write a Review
On Sale
  • Aspire Spryte AIO Starter Kit
  • Aspire's Spryte AIO POD system
  • Aspire Spryte AIO Starter Kit colour options
  • Aspire Spryte AIO POD
  • Aspire Spryte AIO Starter Kit
  • Aspire Spryte AIO Starter Kit
  • Aspire Spryte AIO Starter Kit
  • Aspire Spryte AIO Starter Kit
  • Aspire Spryte AIO Starter Kit
Now: £29.99
Was: £32.00


Aspire Spryte AIO Kit

The Aspire Spryte is an AIO pod system. The all new design of the pod system is both slim & stylish coming in 5 popular satin finish colours & with adjustable airflow for a tailored vape suited to exactly the way YOU want to vape.

With its easy-fill 2ml capacity pod, the Spryte sits very comfortably in the palm during use making it very discreet in use.

Utilising  easy-to-fit BVC coils, the Aspire Spryte All in One Pod system comes with 1 x 1.8ohm coil as well as a 1.2ohm coil intended specifically for use with nicotine salts.

Aspire Spryte colour options available: Olive Green, Grey, Black, Blue & Pink. 

Buy additional or spare, replacement PODs pre-fitted with 1.6oHm coils here: Aspire Replacement PODS

Buy spare or replacement coils here: Aspire BVC Coils


  1. Remove the pod & turn it upside down.
  2. Remove the chimney unit then unscrew the spent coil.
  3. Replace with new coil.
  4. Reinsert chimney into the pod.
  5. Push to click the pod back into place.

Note: To avoid dry burn & causing damage to a new coil always always fill & let the device stand for 2-5 minutes. This will allow the coil & wick to become properly saturated.


  1. Remove the pod & invert.
  2. Remove the silicone plug from the 4.6mm diameter filling hole
  3. Fill the pod with e-liquid then secure the silicone plug back into place.
  4. Push to click the pod into the Spryte device.


Charging of the Spryte is via the supplied micro usb cable which slots into the port at the base of the mod.

The maximum charge current can reach up to 1000mA.

  • When attached to the power the Spryte's LEDs will flash blue & red three times.
  • When fully charged the LED lights will flash blue & red 20 times to alert you to remove from the power source after which they will remain off.


  • Dimensions – 108mm x 26mm x 26mm
  • 2ml Capacity
  • Integrated 650mAh Rechargeable Battery
  • Constant Output Wattage: 12W
  • Single Fire Button Operation
  • Aluminium Body Construction
  • Satin Finish
  • Plastic Drip Tip  Cap
  • Bottom-Fill Design – leak proof silicone plug
  • Airflow Vents – Fully Adjustable Airflow System
  • Aspire (BVC) Bottom Vertical Coil Technology
  • 1.8ohm BVC Coil – Rated for 3.0-5.0V
  • 1.2ohm BVC Nicotine Salts Coil – Rated for 10-12W (Optimised for Nic Salts)
  • Micro USB Charging Port – 1A Max Current



  • 1 x Spryte device
  • 2 x Extra O rings
  • 2 x coils (1.8Ω regular BVC & 1.2Ω for Nic Salt)
  • 1 x Silicone seal
  • 1 x Micro USB Cable
  • 1 x Warranty Card
  • 1 x User Manual


View AllClose

Warranty Information

Exhale's products (*excluding exceptions) are covered with a 30 Day Guarantee. *Exceptions: 1. For Health & Safety reasons Eliquids are sold as non-returnable. Please take care when ordering to select the correct strength and flavour. 2. Atomisation devices/coils are covered for a period of 48 hours from receipt. Please ensure your device is functioning properly as soon as you receive it. Exhale recommends that purchasers be aware that electronic cigarette atomisers and batteries, although made to the highest standards, are functional devices that may fail and that they will deteriorate over a period of time, more so if in daily use. As a general guide, an atomiser's lifespan is approx. 14-80 days dependant on usage, and a battery has a life of approx. 1-4 months.
View AllClose

1 Review

  • 5
    Best kit i have had

    This has to be the best kit i have ever owned, You will not regret this. perfect for stealthy vaping and lasts all day. so good i bought 2 more.

View AllClose