Description
Aspire PUXOS kit
Hard to believe but, Aspire have raised the bar all over again!
The ultimate MOD, Puxus comes with adaptability and flexibility along with Aspire's iron-clad safety features, superior build quality and the product reliability Aspire is famed for. It also happens to be very comfortable to hold by fitting well in your hand, purse or pocket!
A bit of a "Yoga Ninja" Puxos is quite the show off in terms of its flexibility;
It allows the use of 3 different battery types. Now you can chose to use either 18650, 20700 or a 21700 lithium cells to provide long lasting power.
Puxos can be used in various modes choose to set your power output by Wattage or Voltage, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3) and can be used in ByPass allowing non stop vape enjoyment.
In terms of its tank the Puxos kit includes the all-new Aspire Cleito Pro tank which accepts coils from both the Cleito and Cleito Exo tanks.
As well as being flexible in terms of battery power & coil type, Aspire has gone even further by providing Puxus in 14 different colour and style options all of which are interchangeable!
Going from plain single colours to a host of contemporary designs you can customise your MOD in any way you like. The ‘snap on’ magnetic side panels/ battery covers are fully interchangeable and available to buy separately.As you collect them why not mix and match the side panels to create a truly unique look?
The Aspire Puxos is simple and easy to use, and just as simple to charge too. Just attach the supplied micro usb cable to the charging port & then on to your power supply.
Upon connection the screen will display a growing battery icon allowing you to easily monitor the recharging progress. At 4.2v/fully charged, the overcharge protection kicks in stopping the charge process. The screen will then remain off. Maximum charging rate is 2 amps.
FILLING
Filling the tank is a breeze thanks to top fill slot. Just slide up the top ring to reveal the filling slot then with your unit helt horizontally, fill with your preferred e-liquid - see supplied product images &/or product user manual
The Cleito Pro tank can be fully disassembled for cleaning and maintenance. Replacing coils couldn't be simpler.
COIL REPLACEMENT
Unscrew the Delrin drip tip, then remove the top section. Now unscrew and remove the current coil and replace it with the fresh coil. Before vaping always to allow a newly fitted coil ample time so that its wicking material can become thoroughly saturated with liquid.
BATTERY CHOICE
Batteries are fitted by removing the magnetic side panel, inserting the battery positive pin to the top, then replacing the magnetic panel. Please not that when using the 18650 battery you must mount it using the adaptor supplied with the kit. If using a 20700 battery you should select the same output as 21700 battery.
- Accepts 18650, 20700 or 21700 battery cells (use adaptor supplied when using 18650 cell)
- Dual Output modes 21700 - 1-100watts/ 18650 - 1-80watts
- Use in various modes: Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3)
Safety Features
- Overdischarge protection
- Overcharge protection
- Short circuit protection
- Overheat protection
- Battery reverse protection
- Auto-cut off at 10 seconds
- TPD Compliant 2ml tank
- Top Filling
- 0.5ohm Coils 60 - 80 watts.
WHAT'S IN THE BOX?
- 1x Puxos mod
- 1x Cleito Pro tank(2ml)
- 2x Coils (0.5Ω) 60 - 80watts.
- 6x O-rings
- 1x USB Cable
- 1 x 21700 battery cell
- 1x 18650 battery adapter (preinstalled)
- 1x Warning card
- 1x User manual
Warranty Information
Related Products
ASPIRE K1 STEALTH KIT
Aspire
Aspire Archon 150W MOD
Aspire
Aspire K3 Quick Start Kit
Aspire Athos Tank
